USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
The particular values are showing with a picture in folder of laser software on the USB
flash drive and on the Anodized aluminum piece that came with your machine.
Save those setting on the “Scanning(Reverse compensation)” check box.
6. Create sample text for engraving directly on RDworks, then set up the parameter and
download the file to your machine.
More details for how to use software please watch the instruction video below.
https://www.thunderlaser.com/video/how-to-use-your-laser-software.html
7. Click “Original” and “Frame” on the display, please make sure that the material is in the
right location and there is enough space for working.
① Control arrow button to move the laser head;
To Next Page
Loading...
