USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
4.8 How to use the TL-Timer
The TL-Timer is an additional tool for laser machines.
It will control laser machines periphery like air pump, exhaust fan, warning lights, heat
alarm detector, electrical locks and lot of other stuff automatically.
This will increase the ease of use of your laser machine.
Please note the different types of connection, which makes the TL-Timer able to work
with each kind of laser controller.
About TL-Timer controller interface and buttons description：
1. OUT1: Control the green light of warning light; When the machine is not at work, the
warning light is in green color;
2. OUT2: Control the red light of warning light; When the machine is working or getting
around alarm message on LCD panel, the warning light turns red;
3. OUT3: Control the exhaust fan; Delay shutdown is set to 15 second（Factory default
settings, change it if required）;
4. OUT4: Control air assist with “Low volume”; Delay shutdown is set to 10 second
（Factory default settings, change it if required)
5. OUT5: Control air assist with “High volume”; Delay shutdown is set to 10 second
（Factory default settings, change it if required）;
6. OUT6: Control the fire alarm system; When A high temp is detecting on working area,
To Next Page
Loading...
