USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
3.3 Before Installation
1. Take out the sponge around the laser tube. Like below:
2. Remove the nylon cable ties around the honey comb plate.
Remove the transparent bag from the front of honey comb plate, Like below:
The transparent bag has a set of machine door keys, USB flash drive,
and an engraving test sample. The USB flash drive stores software,
manuals, libraries, etc… that you will need.
To Next Page
Loading...
