USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
Reverse Offset/Scan Offset compensation settings for this specific machine are included.
These settings need to be entered into your RDWorks and/or LightBurn
settings to ensure the highest engraving quality. Refer to the Ruida
and/or LightBurn Manuals for these necessary procedures.
3. Rotate the E-Stop switch in the direction of the arrows to reset. Familiarize
yourself with the emergency stop button’s operation and location.
4. When you have the machine in its final position, please be sure to re-fix the feet
in all four corners. Please see below:
The main power cable is in the tool box that came with the machine.
To Next Page
Loading...
