USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
3.4 Exhaust System – Requirements
Proper fume extraction is imperative to evacuate the combustible and noxious fumes that
are created during the lasing process. This machine must be equipped with an adequate
exhaust system. This includes a blower of rated flow, volume, and duty cycle as well as
properly installed ducting and peripherals. You can further reduce smells from fine
particulate matter with an inline filtering system (not included. Call TL-USA for info).
Connection - see section 3.7.3 connecting the Exhaust System.
Do not start the machine without an adequate exhaust system.
3.5 Air System – Requirements
The included air pump supplies the dual stage air assist control and is a critical component.
This helps keep the focusing lens clean and cool during the engraving process. Air assist
is also critical when cutting to reduce flame-ups and clear the debris field.
Always use the system’s Air Assist feature when vector cutting.
To Next Page
Loading...
