USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
4.9 How to use air-assist control (IF EQUIPPED)
The Air-assist control is an additional tool for laser machines.
Generally, cutting needs the air assist with high air-volume but engraving needs the air
assist with low air-volume.
Air-assist control is available in high- and low-volume for engraving and cutting-jobs via
software-setting, this will increase the ease of use of your laser machine.
1） How to select the air assist with high volume or low volume?
In RDworks software, high volume or low volume is selected on the “Air-Assist Control”
option. We suggest select “High” for cut mode and select “Low” for scan mode(engraving
mode).
To Next Page
Loading...
