OPERATING MANUAL 1. SAFETY
ThyssenKrupp Aufzugswerke GmbH 8 Issue 06.2004
Informal information about safety measures
• The operating manual must always be available at the location of the
installation.
• The general and local regulations for the prevention of accidents and
environmental regulations must also be made available and observed.
• Clearly and easily visible statutory safety instructions must be made
available for the users.
• See to it that all information concerning safety and hazards is always
visibly and legibly made available on the machine.
Use as intended
DAF270 is designed in accordance with the state of the art and the
recognized safety regulations. DAF270 shall only
• be used for its intended purpose
• be used only if safe operation is ensured
DAF270 shall exclusively be used as drive for lifts.
Any other use or any use exceeding the scope of above definitions is
regarded as use outside of the intended purpose. THYSSENKRUPP
AUFZUGSWERKE cannot be hold liable for any damages resulting from this
and for any damages which are caused by any errors of procedure.
Use within the scope of its intended purpose also comprises
• observance of all information of the operating manual
• fulfilment of the instructions applying to putting into service, installation
description and inspection and repair work.
Guarantee and liability
The "General Conditions and Terms of Sale" of THYSSENKRUPP
AUFZUGSWERKE GmbH apply generally.
Any claims for guarantee and liability are excluded in the case of injury to
persons or damage to property resulting from one or several of the causes
below:
• use of DAF270 outside the scope of its intended purpose
• inexpert mounting, putting into service, operating and maintaining of
DAF270
• use of DAF270 with defective and/or non-operative safety and
protective devices
• disregard of the instructions in the operating manual that apply to
transportation, storage, mounting, putting into service, operation and
maintenance of DAF270
• unauthorized constructional modifications of DAF270
• unauthorized modification of drive (rating etc.)
• unsatisfactory supervision of parts that are subject to wear
• inexpert repair work
• catastrophes caused by outside influences and Act of God
To Next Page
Loading...
Need help?
General
