OPERATING MANUAL 1. SAFETY
ThyssenKrupp Aufzugswerke GmbH 9 Issue 06.2004
Constructional modifications at DAF270
DAF270 is adjusted at the factory and delivered ready for work.
In the case of any modifications of the machine THYSSENKRUPP
AUFZUGSWERKE GmbH cannot be hold liable.
Use of DAF270 and possible hazards
DAF270 shall only be operated in a closed machine room, provided with
cover and rope guard at the traction sheave or installed in a machine frame
in the headroom. The owner of the installation must verify that the drive is
accessible to trained experts only.
Works at the drive shall only be performed with the drive disconnected from
power supply and the installation protected against unintentional switching
on.
See to it that the safety distance to all revolving parts (marked yellow) is
observed by persons working in the machine room / headroom.
Inexpert handling can cause danger to life for the user or third parties resp.
impairment of the component or material property.
Failures which possibly impair the correct functioning are to be eliminated
immediately.
To Next Page
Loading...
Need help?
General
