ThyssenKrupp TAC 32 - EP Power Unit Components

Owner’s Manual
E2001, 2008 THYSSENKRUPP ELEVATOR Printed in USA September, 2008
Power Unit -3
EP Power Unit
3
6
8
4
1
7
11
10
9
5
2
ITEM PART NO. PRINT NO. DESCRIPTION
1 75477 O-Ring, Manifold Valve to Pump
2 702117 O-Ring, Manifold Valve to Jack
3 109701 Coupling, Quick 1/8” (All jobs not to Canada.)
Coupling, Quick 1/4” (Canada Only)
4 700759 Pipe Nipple .125 (All jobs not to Canada.)
108898 Pipe Fitting, .125 x .250 (Canada Only)
5 700247 Hose, 90º Pipe
6 478AE1 Clamp,Hose
7 642AT3 Pipe Coupling Groove, 2” (For 60, 75, 108 and 158 gal. tanks.)
Pump to Valve
8 844AB3 Thermostat Assy. (For 60 and 75 gal. tanks)
844AB4 Thermostat Assy. (For 106 and 158 gal. tanks)
9 148787 Pump, Submersible (60 GPM)*
146458 Pump, Submersible (70 GPM)*
146461 Pump, Submersible (80 GPM)*
146460 Pump, Submersible (95 GPM)*
142498 Pump, Submersible (125 GPM)*
142497 Pump, Submersible (150 GPM)*
142496 Pump, Submersible (170 GPM)*
142495 Pump, Submersible (190 GPM)*
10 Motor, Submersible (Job Specific, see nameplate.)
11 I-2 Valve Selection Chart (Job Specific, see nameplate.)
* GPM applies only when motor supply is 60 HZ.