Need help?Do you have a question about the Tiger 370 CNC--MR and is the answer not in the manual?
Introduction to the machine and its purpose.
Overview of the TIGER 370 CNC-MR electromechanical pneumatic saw.
Details of the machine's nameplate, general specifications, and key technical data.
Information on cutting speeds, electrical power ratings, spindle motor, and physical dimensions.
Detailed description of the TIGER 370 CNC-MR model's functional parts.
Description of the cutter head and its function in making cuts.
Explanation of the vice unit for clamping and the feeder for material delivery.
Details about the control panel, its positioning, and the machine base.
Guidelines for safe operation, lighting, and connections.
Specific safety recommendations for operators, PPE, and safe practices.
Description of safety devices and compliance with relevant EEC directives.
Measures to prevent blade contact and details on emergency devices.
Information on noise levels, vibration emission, and electromagnetic compatibility.
Information on machine packaging, storage, and safe handling.
Anchoring, minimum room requirements, and installation checklists.
Procedures for connecting the machine to compressed air and power supply.
Overview of the control panel and detailed explanation of keyboard functions.
Step-by-step guide for performing a cutting cycle, including head and vice operations.
Managing lubricant/coolant and understanding technological control parameters.
Procedure for starting up the machine and operating in semi-automatic mode.
Detailed procedure for automatic operation, single program, and multiple programming.
Operating modes for single and continuous loops with different depths/lengths.
Pneumatic diagrams and APS/P drive specifications for step motors.
Layout of drive components, input/output schematics, and reading wiring diagrams.
Letter codes for components and detailed lists of cables used in the machine.
Lists of components, terminals, and IUD/IUV card inputs/outputs.
Detailed exploded views of major machine assemblies like the base and vice.
Displaying, editing set-up parameters, and setting the machine language.
Setting machine type and step motor parameters like screw step and acceleration.
Configuring blade characteristics, motor settings, and supply unit parameters.
Adjusting blade tension, optional settings, and cutting head stroke.
Calibrating the head transducer and adjusting mechanical components.
Procedures for replacing control console microchips and EEPROM memory.
Replacing the MEP 24 controller Eprom and adjusting display brightness.
Adjusting the cutting head stroke and the blade-cleaning brush position.
Step-by-step guide for replacing the cutting blade.
Realignment of the feeder and adjustment of vice play and anti-chip device.
Operator responsibilities and daily, weekly, monthly maintenance tasks.
Maintenance of transmission box and recommended oils for circuits.
Details on oils for transmission box, lubrication, and optional spray mist system.
Information on cutting speed, inverter specifications, and basic version features.
Guidelines for choosing blades, tooth pitch, and interpreting swarf types.
Factors affecting cutting/feeding speed and description of blade structures.
Description of blade types, tooth shapes, and positive/negative cutting angles.
Table to select blade toothing based on material, speed, and section.
Guide to diagnosing and resolving issues related to blades and cutting.
Diagnosing machine faults via control console and interpreting IUD/IUV card signals.
Understanding and responding to machine error, alarm, and emergency messages.
List of optional accessories and description of the CB 6001 bar loader.
Details on the circular blade, roller tables, and emulsible oil.
Devices for roller table support and motor chip discharger unit installation.
To Next Page
General