5
Introduction and technical specifications 1--1..........
Foreword 1--1...................................
Machine presentation 1--1..........................
Machine specification 1--2.........................
Technical Data 1--2...............................
Technical Data 1--4...............................
Dimensions 1--4.................................
Functional parts 2--1..............................
TIGER 370 CNC--MR model 2--1...................
Cutting head 2-- 2.................................
Cutting vice 2--2.................................
Control Panel 2--3................................
Feeder 2--3......................................
Base 2--4.......................................
Safety and accident prevention 3--1..................
Use of the machine 3--1...........................
General recommendations 3--1......................
Recommendations to the operator 3-- 2................
Machine safety devices 3--4........................
Reference standards 3--4...........................
Protection against accidental contact with the blade 3--5..
Electrical equipment 3--5..........................
Emergency devices 3--5...........................
Noise level of the machine 3--6......................
Noise level measurement 3--6.......................
Noise level values 3--7............................
Vibration emission 3--7............................
Electromagnetic compatibility 3--7...................
Machine installation 4-- 1...........................
Packaging and storage 4--1.........................
Anchoring the machine 4--4........................
Minimum requirements 4--4........................
Check list 4--4...................................
Connection to the compressed air supply 4--6..........
Connection to the power supply 4--6.................
Description of machine operation 5-- 1................
Description of the control panel 5--1.................
To Next Page
Loading...
General