TigerStop TS Series User Manual

18
Setup
1. From the Ready Screen, press the [Show] soft key.
2. Press the [Menu] soft key.
3. TigerStop requires a password to access all menu options. Enter the
password and press
• By default, the TigerStop password is the serial number.
SeT Ker f
4. At the Menu Select screen, press the [Setup] soft key.
5. Press until reaching the Kerf screen.
6. Enter the kerf and press the [Done] soft key.
Check and reset the kerf with every saw blade change.
SeT inTerconnecT TYpe
1. From the Ready Screen, press the [Show] soft key.
2. Press the [Menu] soft key.
3. TigerStop requires a password to access all menu options. Enter the
password and press
• By default, the TigerStop password is the serial number.

TigerStop TS Series Specifications

General

Brand	TigerStop
Model	TS Series
Category	Power Tool Accessories
Language	English