23
Jog
1. Start at the Ready Screen.
2. Press and hold or .
If the jog buttons move TigerStop in the wrong direction, use the ‘Jog
Reverse’ setting in the ‘Setup’ menu to reverse the movement.
Manually jog TigerStop towards or away from the tool.
quicK calibraTion
A short-cut to the calibration setting.
1. Start at the Ready Screen.
2. Place sample material against the TigerStop’s stop and cycle the tool.
3. Measure the length of the processed sample.
4. Press the [Calib] soft key.
5. Enter the measured value and press
6. Press the [Done] soft key.
• If desired, disable the quick calibration soft key in the Options menu
(page 33).
• Disabling quick calibration eectively password-protects the
calibration function.
TigerStop
®
Standard Controller Basic Functions
preSeT
The Preset function is a set of 100 programmable hot keys for quickly accessing common lengths.
Presets:
• Can be used in Set Point, Pusher, or Increment mode.
• Can be programed in Preset slots number 1 - 100.
preS eT pr ogr aMM ing
1. Start at the Ready Screen.
2. Press the [Show] soft key.