19
Set TIK has four settings:
None - No interconnect is installed.
Standard - The standard interconnect kit is installed.
Advanced - The advanced interconnect kit is installed but working in semi-automatic mode.
Full Auto - The advanced interconnect kit is installed and working in full automatic mode.
7. Press
8. Enter the TigerStop password and press
9. Press to toggle the setting.
10. Press the [Done] soft key.
4. At the Menu Select screen, press
5. Press the [SysInfo] soft key.
6. Press until reaching the Set TIK screen.
Setup
opTiMiZer SeTTingS
Dynamic Optimization (sold separately) comes preset for best results. Adjust these settings as needed, only.
1. From the Ready Screen, press the [Show] soft key.
2. Press the [Menu] soft key.
3. TigerStop requires a password to access all menu options. Enter the
password and press
• By default, the TigerStop password is the serial number.
To Next Page
Loading...
Need help?
General