TiLite ZRA - Page 10

ZRA_Aero Z Owner’s Manual
OM_ZRA_Aero Z_0913RevA
viii
CHAPTER 8: AXLE PLATES AND CAMBER PLUGS (CENTER OF GRAVITY;
REAR SEAT HEIGHT) 8-1
STANDARD CAMBER MOUNTS 8-1
Adjusting the Rear Seat Height 8-1
Adjusting the Center of Gravity 8-2
Replacing the Camber Tube 8-2
ADJUSTING TOE-IN/TOE-OUT 8-3
CHAPTER 9: AXLES 9-1
STAINLESS AND TITANIUM QUICK-RELEASE AXLES 9-1
Adjusting the Quick-Release Axle
9-1
QUAD QUICK-RELEASE AXLES 9-1
Adjusting the Quad Quick-Release Handle 9-1
Adjusting the “Play” 9-3
CHAPTER 10: WHEEL LOCKS 10-1
COMPACT PUSH TO LOCK 10-1
Adjusting
10-1
Replacing 10-1
COMPACT PULL TO LOCK 10-2
Adjusting 10-2
Replacing 10-2
COMPACT PUSH TO LOCK AND COMPACT PULL TO LOCK WHEEL LOCKS WITH
EXTENSION HANDLES 10-2
COMPACT SCISSOR LOCK 10-2
Adjusting 10-2
Replacing 10-3
UNI-LOCK 10-3
Adjusting 10-3
Replacing 10-4
Changing the Uni-Lock from the Push to the Pull Position 10-4
Repositioning the Handle of the Uni-Lock Wheel Lock 10-4
UNI-LOCK WITH EXTENSION HANDLES 10-6
ALUMINUM SCISSOR LOCK 10-6
Adjusting 10-6
Replacing 10-6
CHAPTER 11: CASTERS AND FORKS 11-1
STANDARD FORK 11-1
Replacing Casters 11-1
Replacing Forks 11-1
SLIPSTREAM SINGLE-SIDED FORK
11-2
Replacing Casters 11-2
Replacing Forks 11-2
ADJUSTING THE FRONT SEAT HEIGHT 11-2
ADJUSTING THE FRONT SEAT HEIGHT ON SLIPSTREAM SINGLE-SIDED FORK
11-3
FLOATING CASTERS
11-3
FROG LEGS
®
11-4
Replacing Casters 11-5
Replacing the Elastomer Shock 11-5
Replacing Frog Legs
®
11-5
ANGLE ADJUSTABLE SPEEDLOADER CASTER MOUNT
11-6
Adjusting the Angle 11-6