TimerGPS TimerGPS+ - Initial Product Setup; Language and Unit Selection; Horse Profile Creation

9
character when giving a name to horse. During basic and race exercises, pressing the up button will display the overall time,
time or average pace at the top of the screen. During a track exercise, pressing the UP button will show the overall time, lap time
or average pace at the top of the display. During a countdown exercise, pressing the UP button will display the countdown time,
time or average pace.
2.5 DOWN button
Press the down button to get from the basic mode to the menu, where all the training functions are listed. Pressing the down
button will select the next item on the menu list or brows a character forwards when naming a horse. During a basic exercise,
track exercise or race exercise pressing the down button will show the distance, average pace of time at the bottom the display.
3 Startup and initialisation of the TimerGPS+
Press and hold the power button switch the product on. The first time the product is switched on, one must select a language with
the UP and DOWN buttons and press the START/STOP button to confirm language (language can be changed later from the
settings menu). After the language has been selected, choose the unit of distance the device will use to display data. Select the
desired unit with the UP and DOWN buttons and press the START/STOP button to confirm. The product will now switch itself
off, and need to be switched on again. A prompt to add a horse will be shown on display. The default name for the horse will be
shown as 'UNNAMED'. Delete characters one-by-one with the INT/BACK button, then use the UP and DOWN buttons to select
each individual character for the horse's name. Press the START/STOP button to confirm a selected character, then when the
horse's full name has been typed select the (⏎) character from the list and press the START/STOP button finally to confirm the
horse's name. The product will now be in start mode and you can see the version of the program the product is using. Press the
UP or DOWN button to go to the menu. From here, it is possible to browse the exercise log, select different exercises, or change