PK-232 – MBX OPERATING MANUAL COMMAND SUMMARY
4/91 A-43 168
GRAPHICS
PRTYPE 0 1 2 3 4 5 6
–––––––––––––––––––––––––––––––––––––––––––––––
0-3 60 120 120 240 50 72 90
4-7 60 120 120 240 50 72 90
8-9 60 120 144 200 80 72 90
12-19 136 240 144 160 50 72 96
20-21 60 60 60 60 60 72 100
24-27 60 120 144 240 60 72
28-29 60 120
32-35 60 120 120 240 80 72 90
36 60 60 60 60 60 60 60
40-43 60 120 120 120 60 72 144
44-47 72 144 144 72 72 72 72
48-51 50 160 80 50 50 80 80
In using the various GRAPHICS densities above, the user should be aware that not all the combi-
nations or parameters work, especially with the slower printers (100 CPS or less). For example, a
combination of PRTYPE 2, FSPEED 4, GP.APHICS I and ASPECT 4 would require the printer to print
a pattern of 8 dots by 960 every 3 seconds which would mean trouble for a 100 CPS printer. On
the other hand, a combination of PRTYPE 2, FSPEED 2, GRAPHICS 0 and ASPECT 2 would work, as
it results in a pattern of dots 8 by 480 every 12 seconds. We know the following combinations of
dot densities and FSPEED cause trouble.
FSPEED, 8" width (narrow) FSPEED 13" width (wide)
Dot Density 0 1 2 3 4 0 1 2 3 4
60 dpi s
72 dpi x
80 dpi x
90 dpi s x
96 dpi s x
100 dpi s x
120 dpi s x x
136 dpi x x x
144 dpi x s x x
160 dpi s x x x x x x
200 dpi x x x x x x x
240 dpi s x x x x x x x
HBaud "n" Default: 1200 bauds
Mode: Packet Host: HB
Parameters: "n" - values specifying the data rate in bauds from the PK-232 to the radio.
HBAUD sets the radio ("on-air") baud rate only in the Packet operating mode. HBAUD has no rela-
tionship to your computer terminal program's baud rate. Available HDLC packet data rates "n" in-
clude 45, 50, 57, 75, 100, 110, 150, 200, 300, 400, 600, 1200, 2400, 4800 and 9600 bauds. Inter-
nal modems are provided for 45 - 1200 bauds. At higher data rates, an external modem must be
used.
To Next Page
Loading...