Tippmann X7 PHENOM - Page 28

28
E
N
G
L
I
S
H
Phenom Marker Parts List
ITEM
NO. QTY. PT. NO. DESCRIPTION
1 1 TA30043 Receiver, Left Half
2 1 TA30044 Receiver, Right Half
3 1 TA30027 CFS Hose Fitting Assembly
4 1 TA05016 Hose, 5/16” ID x 1½”
5 1 TA30057 Compression Spring
6 1 TA30003 Compression Spring (apply grease when assembling)
7 1 TA30101 Front Bolt Assembly (apply grease inside and outside)
8 5 98-01A Screw, LHSHCS
9 1 TA30016 Pressure Gauge Plug Assembly
10 1 FA-18 Ball Latch
11 1 TA10038 End Cap
12 3 TA10045 Push Pin Assembly
13 2 02-PIN Push Pin Assembly
14 1 02-41 ¼ - 20 UNC x ⅞” SHCS
15 1 TA30047 Front Grip/Shroud Assembly
16 1 TA30041 Barrel
17 1 TA30004 Magazine
18 1 TA06061 Front Sight Assembly
19 2 TA07065 Bolt
20 1 TA06041 Rear Sight Assembly
21 1 TA10042 Hopper Assembly
22 5 9-PA Hex Nut, Black
23 1 TA20046 O-ring
24 1 02-69 Barrel Adapter Assembly
25 1 TA30006 Magazine Release Pin
26 1 TA30009 Magazine Release Button
27 1 TA30032 Compression Spring
28 1 TA30042 Name Plate
29 1 TA30002 Lower Receiver, Right (Electro-pneumatic model)
29 1 TA30061 Lower Receiver, Right (Mechanical model)
30 1 TA30001 Lower Receiver, Left (Electro-pneumatic model)
30 1 TA30060 Lower Receiver, Left (Mechanical model)
31 1 TA99600 Hall Effect Electronics (Electro-pneumatic model)
32 1 TA30103 Selector Switch
33 1 02-38 Trigger Guard