TKH TKID45F2S - Daynight

User Manual - Network Dome - TKID45F2S - TKID85F2S - TKID45M1S - TKID85M1S
EN
21
Table 2-5 WB Setting parameters description
Parameter Meaning Configuration Method
Mode It is adjusted based on application
scenarios to improve the fidelity of
the image color.
The WB modes include:
z
Auto: In automatic white balance
(WB) mode, the system
automatically performs white
balance based on the monitoring
environment.
z
Tungsten
z
Fluorescent
z
Daylight
z
Shadow
z
Manual: In manual WB mode,
you can manually select a WB
mode based on the monitoring
environment.
[Setting method]
Select a value from the drop-down list.
[Default value]
Auto
Red Gain
It indicates the gain applied to red
channels. As the value increases, the
color temperature becomes lower.
This parameter is valid when Manual
Mode is set toCustomized.
[Setting method]
Drag the slider.
[Default value]
0
Blue Gain It indicates the gain applied to blue
channels. As the value increases, the
color temperature becomes higher.
This parameter is valid when Manual
Mode is set toCustomized.
[Setting method]
Drag the slider.
[Default value]
0
2.7 Daynight
The day night mode settings vary based on device models. For details, see the
following sections.
Figure 2-7 to Figure 2-10 shows the DayNight Mode interface.