TM 9-1829A, April 1944 89/100 2021-07-07
Chapter 11: Stewart-Warner drive joints
Section I: 666-type drive joints
56. Description
a. The Stewart-Warner 666-type drive joint (sometimes known as an adapter) consists of a train of four gears
inside a die-cast box (figs. 136 and 137). Threaded sleeves are provided for connecting the drive joint to the
power take-off and for attaching the flexible shaft.
Figure 136: Stewart-warner type 666 drive joint
Figure 137: Stewart-Warner type 666 drive joint, disassembled
To Next Page
Loading...