- 65 -
R Display Signals
When the START pad is pressed:
Display Reason How to reset
The oven area is too hot When the oven area has
(above 40°C/105°F). This cooled, press STOP pad and
may occur during continuous start again.
use.
During operation
During operation the
remaining time dis-
plays as follows:
There has been an interrup-
tion in the power supply
(unplugging of the power
cord, or malfunctioning of a
household fuse or breaker).
Remove the dough and start
again using all new ingredi-
ents.
SPECIFICATIONS
A.C 120 V 60 Hz
550W
100W
13
3
⁄
4
”x10
1
⁄
4
”x13” (35.0x26.0x33.0cm)
APPROX 18 lbs (Approx. 8.0kg)
13 hours digital timer
APPROX 3’ 11” (1.2M)
378°F / 192°C
248F / 120C
Power supply
Dimension (WxDxH)
Weight
Timer
Cord
Main Heater Protector
Kneading Motor Protector
Thermal Fuse
Heater
Kneading Motor
Power
Consumption
To Next Page
Loading...
