39
CONTROLS AND FEATURES (T type)
Power Trim/Tilt Switch
Power Trim
Press the power trim/tilt switch on the
tiller handle or on the remote control
lever to adjust the outboard motor
trim angle of – 4° to 16° to maintain
proper boat trim. The power trim/tilt
switch can be operated while the boat
is under way or while stopped.
By using the power trim/tilt switch
the operator can change the trim
angle of the outboard motor to
achieve maximum boat acceleration,
speed, stability and maintain
optimum fuel consumption.
The outboard motor trim angle of
– 4° to 16° is the angle when the
outboard motor is installed on the
boat at 12°.
(H1 type)
POWER TRIM/
TILT SWITCH
(R1 type)
POWER TRIM/
TILT SWITCH
REMOTE
CONTROL
LEVER
(H2 type)
POWER TRIM/
TILT SWITCH
(R3 type)
(SINGLE TYPE)
(DUAL TYPE)
POWER TRIM/
TILT SWITCH
REMOTE
CONTROL
LEVER
POWER TRIM/TILT SWITCH
(LEFT) (RIGHT)
REMOTE
CONTROL
LEVERS
(R2 type)
POWER TRIM/TILT SWITCH
REMOTE CONTROL LEVER
36ZZ0T030_EN.book Page 39 Tuesday, November 28, 2017 4:19 PM
To Next Page
