EasyManuals Logo

TOHATSU BFT 90A User Manual

TOHATSU BFT 90A
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
73
PRE-OPERATION CHECKS
Check the following items:
(1) The fuel hose for kinking,
collapsing or a loose connection.
(2) The tiller handle for loose
installation, wobble or smooth
operation (H type).
The remote control lever for
smooth operation (R type).
(3) The switch for correct operation.
(4) The stern bracket for damage.
(5) The tool kit for missing spare
parts and tools (see page 132).
(6) The anode metal for damage,
looseness or excessive corrosion.
The anode (sacrificed metal) helps to
protect the outboard motor from
corrosion damage; it must be exposed
directly to the water whenever the
outboard motor is in use. Replace the
anodes when they have been reduced
to about two-thirds of their original
size, or if they are crumbling.
The possibility of corrosion damage
is increased if the anode is painted
over or allowed to deteriorate.
Parts/materials which should be
installed on board:
Owners Manual
•Tool kit
Spare parts: spark plugs, engine oil,
spare propeller, castle nut, washer
and cotter pin.
Spare emergency stop switch clip
Other parts/materials required by
laws/regulations.
Other Checks
(5) TOOL KIT (see page 132)
(6)
(4)
(3)
(2)
(1)
(3)
(2)
36ZZ0T030_EN.book Page 73 Tuesday, November 28, 2017 4:19 PM

Table of Contents

Other manuals for TOHATSU BFT 90A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TOHATSU BFT 90A and is the answer not in the manual?

TOHATSU BFT 90A Specifications

General IconGeneral
BrandTOHATSU
ModelBFT 90A
CategoryOutboard Motor
LanguageEnglish

Related product manuals