EasyManua.ls Logo

TOHATSU BFT 90A - Page 6

TOHATSU BFT 90A
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
This Owners Manual is using the
following type names when it
describes the operations special to a
type.
Remote control
(optional equipment) type: R type
Tiller handle
(optional equipment) type: H type
Power trim/tilt type: T type
The tiller handle type is classified
into the following two categories.
Tiller handle
(optional equipment) type: H1 type
Multi-Function Tiller handle
(optional equipment) type: H2 type
The remote control type is classified
into the following three categories
according to the control box position.
Side-mount type: R1 type
Panel-mount type: R2 type
Top-mount type: R3 type
Check the type of your outboard
motor and read this Owners Manual
thoroughly before operation.
Texts with no type indication are the
information and/or procedures
common to all types.
Record the frame and engine serial
numbers for your reference. Refer to
the serial numbers when ordering
parts, and when making technical or
warranty inquiries.
The frame serial number is stamped
on the right side of the stern bracket.
Frame serial number:
The engine serial number is stamped
on the upper right side of the engine.
Engine serial number:
STERN BRACKET
FRAME SERIAL NUMBER
ENGINE SERIAL NUMBER
36ZZ0T030_EN.book Page 4 Tuesday, November 28, 2017 4:19 PM

Table of Contents