Page 1-6 Document Ref 942179-001 Rev 1
Crypto VGA Component Technical Manual
1.5.5 PERSONAL PROTECTIVE EQUIPMENT (PPE)
PROTECTIVE CLOTHING
The following clothing should be worn at all times during installation and
maintenance procedures:-
• Protective helmet.
• Protective shoes (conductive).
• Protective gloves and/or protective hand cream.
• Anti static clothing.
• Eye protection.
SAFETY EQUIPMENT FOR WORKING IN HAZARDOUS AREAS
The following safety equipment is required for working in hazardous areas:-
• Only spark free tools are permitted for work on dispensers.
• Work on bearings is only permitted using the standard workshop tools authorised
for this kind of work.
• The use of all electrical tools is strictly prohibited.
• Only the use of explosion protected work lights is permitted.
• The use of telecommunications equipment in hazardous areas is strictly prohibited.
SAFETY INSTRUCTIONS
The following safety instructions must be adhered to during installation and
maintenance procedures:-
• Inhalation of petrol vapour must be avoided. Suitable precautions must be taken
and where necessary respirators used.
• Avoid direct contact of fuel with the skin.
• Use suitable protective clothing, protective gloves and/or protective hand cream.
• Avoid fuel spills.
• No smoking, no naked flames are permitted.
• Long hair and ties can get caught in moving parts. Hair must be suitably covered.
Issue A
To Next Page
Loading...
Need help?
General