Page 1-2 Document Ref 942179-001 Rev 1
Crypto VGA Component Technical Manual
1 INTRODUCTION
1.1 How to Use this Manual
It is recommended that all relevant persons familiarise themselves with the contents of this
manual prior to carrying out any operations or procedures.
This manual is divided into sections which are described as follows: -
Section 1 - Introduction
This section contains information on how to use the manual, the scope of equipment covered,
recommendations on qualified technicians and contact information. It also includes relevant
health and safety information required for the safe installation of the product.
Section 2 - Product Information
This section contains the system descriptions and operating principles of Tokheim’s Crypto
VGA payment system.
Section 3 - Installation of the Crypto VGA unit
This section provides the necessary information for the installation and connection of the
Crypto VGA unit.
Section 4 - Crypto VGA Wiring Diagrams
This section details the wiring diagrams for the Crypto VGA.
Section 5 - Crypto VGA Parts List
This section details the assembly drawings and part identification lists for the Crypto VGA.
1.2 Product Scope
This manual is designed to cover the Crypto VGA in Quantium T-range dispensers and
later models.
1.3 Authorised Technicians
Only qualified technicians familiar with the contents of this manual should carry out the
procedures contained herein.
WARNING : ANY ATTEMPTS TO CARRY OUT THE PROCEDURES OF THIS
MANUAL, BY UNQUALIFIED OR UNAUTHORISED PERSONS, MAY
RESULT IN SERIOUS INJURY OR LOSS OF LIFE.
NOTE : THIS MANUAL IS NOT INTENDED TO REPLACE THE SERVICES
OF A FULLY QUALIFIED TECHNICIAN.
Issue A
To Next Page
Loading...
Need help?
General