TomTom Bandit User Manual

12
Wax, oil, dirt and moisture reduce adhesion, which can result in a weak bond. Make sure that
the area is completely dry.
3. Make sure the mount is aligned in the correctly direction then, in dry, room-temperature
conditions, attach the mount. Push the mount firmly down on to the surface.
The mount won't securely attach if you install it in damp and cold conditions.
4. Wait 24 hours for the adhesive to cure.
5. Install the TomTom Bandit on the mount. Make sure the TomTom Bandit is secure.
Important: Make sure your TomTom Bandit is secure before you start every activity. Regularly
check the security of the mount. If the activity involves shocks or vibration, use a lanyard to
prevent loss of the TomTom Bandit if the mount fails.

TomTom Bandit Specifications

General

Photo Resolution	16 MP
Sensor	CMOS
Battery	1900 mAh
Battery Life	Up to 3 hours
GPS	Yes
Resolution	4K
Image Sensor Size	1/2.3-inch
Field of View	160°
Storage	MicroSD card (up to 128GB)
Connectivity	Wi-Fi, Bluetooth
Sensors	Accelerometer, Gyroscope
Dimensions	94 x 38 x 52 mm
Weight	190 grams
Frame Rate	30fps (4K), 60fps (1080p), 120fps (720p)
Waterproof	IPX7 (without additional housing), IP68 with optional lens cover