Install the bike mount only to a clean and dry surface. Wax, oil, dirt and moisture will reduce
grip, causing the mount to move.
Tighten the bike mount clamps securely by hand. Do not use tools to turn the clamps or you
might damage the bike mount.
Regularly check the security of the bike mount.
Install the TomTom Bandit on the bike mount then adjust the TomTom Bandit's position to get the
correct view.
Tip: Use the Mobile app live viewfinder to set the TomTom Bandit to the correct view.
Using the optional remote control
The remote control can be used to start and stop recording, and to manually add highlights to your
video. Use the remote control when you can't easily or safely reach your TomTom Bandit.
You can hold the remote control in your hand, or you can attach it to a place you can easily reach.
Note: The remote uses Bluetooth Smart to connect to your TomTom Bandit, and can only be used
with one TomTom Bandit at a time.
Connecting the remote control
1. From the Camera Status screen on your TomTom Bandit, move down to open the SETTINGS
menu.
2. Select GENERAL, then move right.
3. Select CONNECT, then move right.
4. Select REMOTE, then move right.
5. Move up or down to turn it on.
6. On the remote control, press the START button for 3 seconds until the LED flashes green.
The remote control is connected to the TomTom Bandit.
Tip: You can also use the Mobile app live viewfinder as a remote control.
The remote control can only be used with one camera at a time. If you want to connect your remote
control to a different camera, repeat the instructions above with the remote control in range of the
new camera.
To Next Page
Loading...
Need help?
General