TomTom Go 520 User Manual

112
Appearance
Select Settings in the Main Menu, then select Appearance.
On this screen, you can change these settings:
 Display
Select Display to change the appearance of the display.
 Route bar
Select Route bar to change the information you see in the route bar.
 Guidance view
Select Guidance view to change the information you see in the guidance view.
 Automatic zoom
Select Automatic Zoom to change how you view a junction as you drive.
 Automatic map view switching
By default, automatic changing of views is on. This means, for example, that your GO shows the
map view when an alternative route is being suggested, along with several other sets of circum-
stances. Also, for example, that your GO shows the guidance view when you start driving and
you start to accelerate. Select this setting if you want to turn off automatic changing between
guidance view and map view.
 Show previews of motorway exits
Select this setting to control the full screen preview when you approach motorway exits.
Display
Select Settings in the Main Menu, then select Appearance.
Theme colour
Select Theme colour to change the colour used in the menus, buttons and icons, and on the map.
Tip: The current location symbol and route also change to the selected colour. You can always
change back to the original colour.
Brightness
Select Brightness to change the following settings:
 Day brightness
Move the slider to adjust the brightness level of the screen during the day.
Settings

TomTom Go 520 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Internal memory	64 MB
Storage capacity	512 MB
Display resolution	480 x 272 pixels
Display size (HxV) (imperial)	4.3 \
Processor frequency	400 MHz
Battery life (max)	5 h

Weight and Dimensions

Depth	24 mm
Width	118 mm
Height	83 mm
Weight	220 g