TomTom Go 520 User Manual

129
Note: You should plug the USB cable directly into a USB port on your computer and not into a
USB hub or USB port on a keyboard or monitor.
When set-up is complete, a TomTom account is created and your GO is linked to that account.
You can now access MyDrive Connect from the notification area on your desktop.
MyDrive Connect starts automatically after the account is created.
Connecting to the internet using USB
If you are unable to connect to the internet using Bluetooth or Wi-Fi or prefer a different method,
you can connect to the internet using a USB connection to a computer.
This means that you can still gain all the benefits of Syncing using TomTom MyDrive.
To connect to the internet using USB, do the following:
1. Make sure your computer has a working internet connection.
2. Connect your device to your computer using the supplied cable.
3. Open or install MyDrive Connect on your computer. For help, go to tomtom.com/getstarted.
Once MyDrive Connect is open, your computer's internet is shared with your device.

TomTom Go 520 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Internal memory	64 MB
Storage capacity	512 MB
Display resolution	480 x 272 pixels
Display size (HxV) (imperial)	4.3 \
Processor frequency	400 MHz
Battery life (max)	5 h

Weight and Dimensions

Depth	24 mm
Width	118 mm
Height	83 mm
Weight	220 g