Tone Commander 8610 - Call Management

8 Tone Commander 8610/8620 User Guide
Displaying Call Appearance Information
Press the CALL key.
Select ID (Shortcut – you can skip this step and immediately
press Call Appearance keys).
Press Call Appearance keys.
Network call information will be displayed for currently active
Call Appearance keys.
"NO CALL INFORMATION" and the assigned directory
number, if available, will be displayed for idle keys.
Press the
CALL or DONE key when finished.
Holding Calls
Press the HOLD key or another Call Appearance key to place
the currently connected call on hold.
The held call appearance indicator will wink with a green light.
Press the held Call Appearance key to return to the call.