24 Tone Commander 8610/8620 User Guide
When Æ appears in the top line of the display, you can press
the
MORE
4
key to see additional menu selections.
Note: The PREF option is only available with National ISDN.
For a list of all selections available from the User Options menu, see
the User Options Menu Tree (page 41).
Setting the Time and Date
From the User Options menu, select CLOCK.
(
SETUP → USER
→ CLOCK)
The current time and date will be displayed, with the cursor
flashing on the first digit.
Enter new digits for the date and time with the dial pad. The
cursor will advance automatically as each digit is entered.
Time must be entered in 12-hour format. AM/PM is changed
with a softkey.
If you need to make corrections, select
Å
BKSP (backspace)
to move the cursor to the left.
The
MORE
4
key moves the cursor to the right.
When all changes have been made, press the
DONE key to
return to the User Options menu or press the SETUP key to
exit Setup Mode.
USER OPTIONS \
PREF VOICE DISPLY PASSWD
04-27-06 11:16AM
|BKSP AM/PM
To Next Page
Loading...
