Tone Commander 8610 - Page 38

34 Tone Commander 8610/8620 User Guide
To use individual ringing tones, press a lit call appearance
key, then press a dial pad key (1-8) to select a ringing tone for
the call appearance and hear a sample of the tone. Repeat for
other call appearance keys.
When finished, press the
DONE key to return to the Personal
Ringing menu or press the SETUP key to exit Setup Mode.
Off-Hook Ringing Options
Incoming calls ring at a muted volume level when you are off-hook on
another call. You can select normal ringing or a single burst of the
ringing pattern.
From the User Options menu, select RING.
(
SETUP → USER → RING)
Select the OFFHK option.
The current off-hook ringing setting will be displayed.
Select NORMAL or SINGLE to change the setting.
Press the
DONE key to return to the Personal Ringing menu
or press the SETUP key to exit Setup Mode.
RINGING TONE=4 KEY02
KEYPAD 1-8 OR ALL
OFFHOOK RING=SINGLE
NORMAL SINGLE