Troubleshooting
3D-MC² Quick Reference Guide
A-12
Problem
Elevation Control key displays :
“No GPS localization”
Causes Solutions
The Layer
currently selected
has not been
localized
properly.
Make sure that the correct Layer
is selected.
You are in a
process of
building a Control
Point file or just
starting the
process.
Disregard the message until the
localization is complete.
Problem
Slope Control key displays:
“3DMC² sensor not connected!”
Causes Solutions
Cross slope
system is not
connected
properly.
Check cable connections display,
the MC² Sensor.
To Next Page
Loading...
