General Precautions
P/N 7010-0921
B-1
Safety
Information
It is your responsibility to be completely familiar with
the cautions described in this manual. These messages
advise against the use of specific methods or
procedures which can result in personal injury, damage
to the equipment, or unsafe operating conditions.
Remember, most accidents are caused by failure to
observe basic safety precautions.
General Precautions
1. Read and become familiar with the machine
manufacturer’s operating instructions, including
safety information, before installing or using your
Topcon equipment.
2. Use extreme caution on the job site. Working
around heavy construction equipment can be
dangerous.
3. DO NOT attach Topcon 3D Machine Control
brackets or hose connections while the machine is
running.
4. DO NOT allow any 3D Machine Control
component to limit the visibility of the operator.
To Next Page
Loading...
