Troubleshooting
3D-MC² Quick Reference Guide
A-16
The Display does
not have power.
The MC-R3 Controller turns on
only when the Display is also
powered on.
Problem
Satellite Status indicator does not flash green.
Causes Solutions
The cable is
incorrectly
connected or
damaged.
Check that the antenna cable is
not cross-threaded at the antenna
and is connected to the
intermediate cable installed on
the machine.
Check the connection at the GPS
Antenna port on the MC-R3
Controller.
If the cable is damaged, contact
your dealer to purchase a new
cable.
The antenna has
poor PDOP.
Check that the Machine Antenna
has a clear view of the sky.
The receiver is
collecting an
almanac.
If this is the first time connecting
to the MC-R3 Controller, the
LED may not flash for several
minutes while the GPS receiver
obtains a new almanac.
Problem
Radio Status indicator does not flash green.
To Next Page
Loading...
