GPS Localization
P/N 7010-0921
A-19
The machine may
be blocking
satellite signals to
the range-pole or
tripod-mounted
antenna.
Watch the status of the
measurement screen. If the status
indicates “waiting for satellites”
move the machine away from the
antenna.
The Control Point
may be located
too close to
obstructions.
Move to an alternative Control
Point or have the surveyor place a
new Control Point away form the
obstructions.
The MC-R3
Controller has not
yet initialized; the
system may be
tracking many
satellites.
The MC-R3 Controller may take
several minutes to initialize.
The range-pole
was unsteady.
Make sure that the pole is held
steady while measurement is
taking place. Any movement will
make for a lengthy initialization
and/or measurement.
Problem
Localization produces large errors.
Causes Solutions
To Next Page
Loading...
