Troubleshooting
3D-MC² Quick Reference Guide
A-22
Problem
There are no H.Error and V.Error values.
Causes Solutions
“Use for
horizontal GPS
localization” and/
or “Use for
vertical GPS
localization”
check boxes may
not have been
selected.
These check boxes need to be
selected for a minimum of three
points. Note that the error value
will be calculated once three
Control Points are measured and
used for the GPS localization.
This troubleshooting is useful
when the Pocket-3D is being used
to perform GPS localization as
well as the display.
To Next Page
Loading...
