Topcon BM-7AC - External Dimensions

Appendix
84
External Dimensions
Request
Use only specified screws when using the tripod screw and screw holes for jig
attachment. Do not tighten the screws any more than necessary. Doing so might
cause internal breakage.
Tripod seat
reference surface
(For tooling)
1/4-20 UNC (Depth 6)
Camera tripod screw
Normal: Cross recessed pan-head screw
Install M4 x 0.7 lengths 6
Rubber leg
Tripod seat surface
Installation surface
A-A Cross section (enlarged view)