Fluorescein Angiography
1
Your hospital will have its own protocol on administering fluorescein and timings
of the procedure.
2
3
Move the machine in until the two circles are green and together within the brackets.
Adjust IR brightness or flash power if required and also the fixation target to adjust the
Patient fixation. When ready, press [Start] to start timer.
17 Topcon (Great Britain) Medical Limited | DRI OCT Triton | Quick Reference Guide | Fluorescein Angiography
Position the Patient - Set the Patient’s chin on the chinrest. Keep their chin and forehead
stable. Be sure to adjust the chinrest height to align the eye marker and the corner of the eye.
Adjust the Patient’s height using the [Up]
and [Down] chinrest buttons found next to
the joystick on the machine.
Fluorescein Angiography
1
Your hospital will have its own protocol on administering fluorescein and timings
of the procedure.
2
3
Move the machine in until the two circles are green and together within the brackets.
Adjust IR brightness or flash power if required and also the fixation target to adjust the
Patient fixation. When ready, press [Start] to start timer.
17 Topcon (Great Britain) Medical Limited |
DRI OCT Triton | Quick Reference Guide | Fluorescein Angiography
Position the Patient - Set the Patient’s chin on the chinrest. Keep their chin and forehead
stable. Be sure to adjust the chinrest height to align the eye marker and the corner of the eye.
Adjust the Patient’s height using the [Up]
and [Down] chinrest buttons found next to
the joystick on the machine.
17
61647 Topcon quick start guide Triton.indd 17 27/03/2019 09:56