Chapter 3 Optional Features and Accessories 31
HDMI Port
Some early FC-5000 models require the use of a USB to
HDMI dongle in order to use the HDMI feature.
The HDMI port on the dock can be used if the FC-5000 has
three rows of docking pin contacts.
A dongle is required for HDMI if the FC-5000 has two rows of
docking pin contacts.
Plug the USB connector on the dongle into a USB port
on the dock, then plug the HDMI cable into the dongle.
(Some dock models come with a dongle. They are also sold
separately.)
How to Use the Dock
1. Provide power to the dock using the 20 W AC wall
charger provided with your FC-5000 (the ports require
external power). A 45 W charger is available as an
option, and we recommend this charger if you are using
the dock as an ofce computer with several peripheral
functions. The 20 W AC wall charger might not provide
enough power to charge the batteries and run the FC-
5000.
2. Plug in the cables for your desired setup.
3. If a hand strap is covering the pin contacts on the FC-
5000, unhook one end or remove it.
4. Hold the FC-5000 horizontally with the docking pin
contacts facing down. Place it over the dock alignment
pins and press down until you feel and hear the lock
engage.
To Next Page
Loading...
Need help?
General
