Topcon IS-100 - Page 30

OPHTHALMIC UNIT
IS-100
Rev. 6 - November 2019Rev. 6 - November 2019
4-5
USER MANUAL
4.2.3. Tabletop
THE BOTTOM OF THE TABLETOP HAS A SAFETY SENSOR FOR
THE LEGS. IN CASE OF CONTACT, IT IMMOBILISES THE CHAIR
LIFTING GROUP UPWARDS ALLOWING IT TO LOWER TO FREE
THE LEGS.
The tabletop (3, Figure 3-3) has two types of movement:
y Rotation: the tabletop can turn 90º, ranging from the rest position to the
work position.
If the tabletop has instruments installed, pick them up before turning
it. Never turn it while it is extended to its maximum length.
The rotation of the tabletop activates the power supply of the
instruments of the tabletop.
y Horizontal sliding: the tabletop can slide horizontally to position the instru-
ments(rstorsecondinstrument).Thereismechanicalxingtosecurethe
position of the tabletop.
Depending on the position of the tabletop, the corresponding
instrument remains electronically active. If this option is not required,
the installer can deactivate it.