EasyManua.ls Logo

Topcon IS-100 - Corrective Maintenance

Topcon IS-100
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPHTHALMIC UNIT
IS-100
Rev. 6 - November 2019
6-3
Rev. 6 - November 2019
USER MANUAL USER MANUAL
6.2. CLEANING
Use of abrasive cleaners, powders, scouring pads, steel wool,
sandpaper, etc., during cleaning can damage the nish on the
tabletop and permanently reduce the chemical and stain resistant
laminate.
Use a damp cloth and mild detergent to clean the tabletop.
Given the chemical resistance of the laminate of the tabletop, the
use of bleach, ammonium chlorides and other antimicrobials does
not damage the surface.
6.3. CORRECTIVE MAINTENANCE
6.3.1. Thermal repair of superficial scratches on the
tabletop
The procedure described in this section is only valid for the tabletop.
It is possible to repair any surface scratches the surface of the tabletop might
have with the following procedure:
1. Put a paper towel on the scratched surface.
2. Spray the paper towel with water.
3. Iron the paper towel.
The iron should be at its maximum temperature.

Related product manuals