Topfield TRF-5300 - Options for On-Screen Display

26 Preference Settings
le from the part where you were watching, set this option to
Continuing.
You can adjust the jump interval that is for playback. Set the
Jump Time Interval option as you desire. Its available range is
10 seconds to 3 minutes.
If you want to enjoy more levels of playback speed, set the Trick
Mode Level option to 2x,4x,8x,16x,32x,64x, 128x; otherwise,
set it to 4x, 16x, 64x, 128x.
NOTE
You can enjoy video les such as Xvid with the digital re-
ceiver. However, the above options might not be eective
depending on the video les to be played. For detailed de-
scription on how to play back a video le, refer to §8.4.
4.6 Options for on-screen display
To set the options for the on-
screen display (OSD), select the
Settings e OSD menu. You
should see a screen like the left
gure.
To adjust the transparency level of the OSD, set the OSD Trans-
parency option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box, the in-
formation box will not be displayed when you switch services.
OSD
OSD Transparency 15%
Info Box Display Time
September 02 05:16
Info Box Position
Animation
Text Scroll
+0 line
Enable
Disable
5 Sec