Ë Press the VF button on the remote and set to the correct
resolution.
576i/576p/720/1080i/AUTO. You may need to press the
VF
ent formats. All formats will be displayed on the front
screen of the Toppro.
d I get zero channels
Ë Make sure the antenna is plugged into the wall socket.
Ë Check that there is a signal coming from the antenna by
connecting it directly to the TV or another device.
Ë You must have signal strength between 50%–90%
Ë Indoor antenna is not recommended as the signal is not
enough to display channels when a service is scanned.
I get a pixilated image on the my Television
Ë Check the plug on the Toppro and on the wall making
sure that it’s a tight connection.
Ë Check that there is a signal coming from the antenna by
connecting it directly to the TV or another device.
Ë You must have signal strength between 50%–90%
Can not receive or adjust sound through Toppro unit
Ë Adjust volume using the and the
Remote.
on the Toppr
o
Ë Use the TV remote to adjust the sound to approx 50%
then use the Toppro remote to adjust volume.
Ë Check the connection between the TV and the Toppro
product.
Ë Make sure you are in the correct AV on the TV
V V
A7
A. Troubleshooting 79
To Next Page
Loading...
