TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100
- 18 -
Step 3 Open the GPS Tracker Parameter Editor
1. Connect MT100 with PC by the configuration cable
2. Confirm MT100 is in the Power Off states
3. Double click GPS Tracker Parameter Editor.exe and Select the COM Port, following
picture shows:
4. Click Start button to open the com port.
5. Turn on MT100and it will connect with the Editor automatic, As soon as they connect
successful, all the buttons are availability and the status bar will clue on’ Tracker Connect!’ ,
then you can Read or Write the MT100’s Parameters
To Next Page
Loading...