9
INSTALLATION
Squeegee
1. Make sure squeegee adjustment
lever is locked in UP position.
Install two adjustment knob
assemblies on squeegee
assembly. Do not thread in all
the way.
2. Slide squeegee assembly on
pivot frame and tighten
adjustment knobs.
3. Insert hose end into squeegee
assembly nozzle throat. Press
down tightly.
Squeegee can be locked in UP position by
raising lever and moving it to the left.
Squeegee can be locked in DOWN position
by pushing lever down and moving it to left.
NOTE: For even floors, squeegee can be set
to float by setting lever halfway between UP
and DOWN positions. Lock in DOWN position
for uneven floors.
NOTE: Never store machine with squeegee
in down position.
NOTE: Always raise squeegee while
backing up.
To Next Page
Loading...
