Tornado 99680 User Manual

8
INTRODUCTORY COMMENT
Thank you for having chosen our machine.
Thisoorcleaningmachineisusedfor
the industrial and civil cleaning and is
abletocleananytypeofoor.Duringits
advance movement, the combined action
of the brushes and the detergent solu-
tion removes the dirt which is aspirated
through the rear suction assembly, giving
a perfectly dry surface. The machine must
be used only for such purpose. It gives the
best performance if it is used correctly and
maintainedinperfectefciency.Wethere-
fore ask you to read this instruction book-
let carefullywheneverdifcultiesarisein
the course of the machine’s use. In case of
need, we ask you to contact our service
department for all advice and servicing as
may prove necessary.
GENERAL RULES OF SECURITY
The rules below have to be followed
carefully in order to avoid damages to the
operator and to the machine.
- Read the labels carefully on the machine.
Do not cover them for any reason and
replace them immediately if damaged.
- The machine must be used exclusively
by authorized staff that has been instructed
for its use.
- During the working of the machine, pay
attention to other people and especially to
the children.
- Do not mix different detergents, avoid-
ing harmful odors.
- Do not place any liquid containers onto
the machine.
- Storage temperature: between -13°F and
131°F (-25°C and +55°C).
- Perfect operating temperature: between
32°F and 104°F (0°C and 40°C).
- The humidity should be between 30 and
95%.
- Do not use the machine in explosive
atmosphere.
- Do not use e machine as a means of
transport.
- Do not use acid solutions in such con-
centrations that could damage the machine
and/or the persons.
- Avoid working with the brushes when
the machine stands still, in order to pre-
ventoordamages.
- Do not use the machine on surfaces cov-
eredwithinammableliquidsordusts(for
example hydrocarbons, ashes or soot).
-Incaseofre,useapowderre-extin-
guisher. Do not use water.
- Do not strike shelvings or scaffoldings,
where there is danger of falling objects.
- Adapt the working speed to the adhesion
conditions.
- Do not use the machine on areas having
a higher gradient than the one stated on
the number plate.
- The machine has to carry out simulta-
neously the operations of washing and
drying. Different operations must be
carried out in restricted areas prohibited to
non-authorized personnel.
-Signaltheareasofmoistoorswithsuit-
able signs.
- If the machine does not work properly,
check by conducting simple maintenance
procedures. Otherwise, ask for technical
advice to an authorized service center.
- Where parts are required, ask for ORIGI-
NAL spare parts to the distributor and/or
to an authorized dealer.
- Use only ORIGINAL brushes indicated
in the paragraph
“RECOMMENDED BRUSHES”.
- For any cleaning and/or maintenance
operation take off the power supply from
the machine.
- Do not take off the protections which
require the use of tools to be removed.
- Do not wash the machine with direct
water jets or with high water pressure nor
with corrosive material.
-Signaltheareasofmoistoorswithsuit-
able signs.
- If the machine does not work properly,
check by conducting simple maintenance
procedures. Otherwise, ask for technical
advice to an authorized service center.
- Where parts are required, ask for ORIGI-
NAL spare parts to the distributor and/or
to an authorized dealer.
- Use only ORIGINAL brushes indicated
in the paragraph “RECOMMENDED
BRUSHES”.
- For any cleaning and/or maintenance
operation take off the power supply from
the machine.
- Do not take off the protections which
require the use of tools to be removed.
- Do not wash the machine with direct
water jets or with high water pressure nor
with corrosive material.
- Every 200 working hours have a ma-
chine check through an authorized service
department.
- In order to avoid scales on the solution
tanklter,donotllthedetergentsolution
many hours before the machines’ use.
- Before using the machine, check that all
panels and coverings are in their position
as indicated in this use and maintenance
catalogue.
- Be sure the recovery tank is empty be-
fore removing it.
- Restore all electrical connections after
any maintenance operation.
- Provide for the scrapping of the mate-
rial of normal wear following strictly the
respective rules.
- When your machine has to stop activity,
provide for the appropriate waste disposal
of its materials, especially oils, batteries
and electronic components, and consider-
ing that the machine itself has been, where
possible, constructed using recyclable
materials.

Tornado 99680 Specifications

General

Brand	Tornado
Model	99680
Category	Scrubber
Language	English