To download information from the ViZiTouch to a USB Device a user with at least a "level 1" password must be
logged in. The first square beside the title is a "Select All" button. Pressing it will select all categories except
"Archive copied files", which serves a separate purpose. The "Download to USB" button will execute the command.
The entire right side is filled with different progress bars, to help monitor the current transfer. If a USB Device is not
present or if there is an error, a message saying "Could not mount USB drive" will appear and any further action is
cancelled. To try again, remove the device, re-insert and press the button once more.
-Archived logs: All logs files that were archived using the "Archive copied files" square button. The purpose of
archiving files is to free up memory on the ViZiTouch by archiving older log files.
-Logs: All logs are currently available in the ViZiTouch memory. A "Comma Separated Values" or ".csv" file is
created every day and is named accordingly. Most software in modern computers will be able to read and interpret
these files. The log files contain the event logs, the pressure logs and the power logs.
-Configuration: All configuration parameters contained in a ".txt" file, including but not limited to nominal values,
serial number, calibration parameters.
Program Backup: A compressed and encrypted file, only readable by the ViZiTouch. This allows the user to copy a
complete ViZiTouch to another one. IMPORTANT: The ViZiTouch is not in service while downloading the program
backup.
To Next Page
Loading...
Need help?
General
