All statistics shown here are calculated since the controller's first start-up was done. All dates are in the
YYYY.MM.DD format and all time references are in the HH:MM:SS format.
-First Power Up: Date and time of when the controller was first powered up.
-First Start Up: Date and time of when the controller's first start-up was completed.
-On Time: Total duration of controller powered on since the first power-up. In Day.Hour.Minutes.
The vertical axis represents the pressure in the actual unit selected. Its scale is dynamic and will resize depending
on the highest recorded value. The horizontal axis represents time and period. The left part of the horizontal axis
shows the beginning of the current scope and the right part shows the end of the scope. Located just right of the
axis, the total scope time is shown. The contextual navigation pad can be used in this page. It allows quick
navigations functions, like “Zoom in”, “Zoom out”, “Rewind”, “Forward” and “Textual Mode”. As always, clicking on
the Navigation Pad Icon in the lower right corner of the screen will pop-up the Navigation Pad functions specific for
this page. By pressing the right or left buttons on the navigation pad, the time will shift back or forth by the quarter of
the current zoom setting, allowing a quick user-friendly navigation.
To Next Page
Loading...
